[Acoustics] ADCP stuck in acquire cycle

[Tyrel F Brandt]

John,

If you are using wireless radio modems, you may need to hook up directly 
to break the loop.

Tyrel F Brandt
Hydrologic Technician
U.S. Geological Survey
Fort Peck Field Office
P.O. Box 124
East Kansas ST
Fort Peck, MT
(406) 526-3532 Voice
(406) 390-1306 Cellular
(406) 526-3651 Fax
tfbrandt at usgs.gov



John W Erbland <jerbland at usgs.gov> 
Sent by: acoustics-bounces at simon.er.usgs.gov
09/14/2006 01:22 PM

To
acoustics at simon.er.usgs.gov
cc

Subject
[Acoustics] ADCP stuck in acquire cycle







I have a 1200 RG that was accidently shut down while in acquire mode. It 
wil not break out of the cycle. It doesn't recoginize the break key 
in BBTalk or any other program. RDI suggested breaking the can and 
seperating the the top board...which I did, and still doesn't work. Dan 
from RDI says he has heard of this maybe one or two other times. Are any 
of you out there the one or two that this has happened to and what did you 
do to get it out of the loop? Any advice at this point will help, and just 
a reminder, make sure you exit out of acquire properly or this may happen 
to you._______________________________________________
Acoustics mailing list
Acoustics at simon.er.usgs.gov
http://simon.er.usgs.gov/mailman/listinfo/acoustics

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://simon.er.usgs.gov/pipermail/acoustics/attachments/20060915/5c0aa18e/attachment.html