[Acoustics] mode use for slow vel

[Huston, Dave]

That or WM11 a) if you have it and b) if you keep your boat speed down.
 
***********************************
Dave Huston, P.E.
Dept. of Water Resources
Central District
901 P Street
Sacramento, CA. 95814
(916) 651-0762 (OFFICE)
(916) 651-0766 (FAX)
***********************************
 

  _____  

From: acoustics-bounces at simon.er.usgs.gov
[mailto:acoustics-bounces at simon.er.usgs.gov] On Behalf Of Terry A.
Kenney
Sent: Wednesday, September 13, 2006 10:40 AM
To: acoustics at simon.er.usgs.gov
Subject: RE: [Acoustics] mode use for slow vel



These conditions are ideal for water mode 5.

 

**********************************

Terry A. Kenney, Hydrologist
U.S. Geological Survey
Utah Water Science Center
2329 Orton Circle
Salt Lake City, UT  84119-2047
(801)908-5046 voice

 

http://ut.water.usgs.gov

  _____  

From: acoustics-bounces at simon.er.usgs.gov
[mailto:acoustics-bounces at simon.er.usgs.gov] On Behalf Of David M
Hernandez
Sent: Wednesday, September 13, 2006 10:50 AM
To: acoustics at simon.er.usgs.gov
Subject: [Acoustics] mode use for slow vel

 


To all, The conditions are: Channel width 100 to 200 ft. Depth 3 to 7
ft. velocity < .1ft/sec. Used Rio 1200khz water mode 12sb bottom mode 5.
Not sure it was the best combination for those conditions, does anyone
have similar conditions? Which mode combinations would work best for
collecting repeatable transects?
Dave

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://simon.er.usgs.gov/pipermail/acoustics/attachments/20060913/fa0c691a/attachment.html