[Acoustics] RE: Acoustics Digest, Vol 28, Issue 2

[David WILLIAMS]

When using the utility program INI2XML.exe to convert the StreamPro xml
files to WinRiver w.000
Format I have noticed that this program sets the "mark bad below bottom"
to NO. When displaying in winriver the "mark bad below bottom" has to be
set manually to YES each time to remove the extra 'bad' bins below the
bottom track depth.
Is there a way to have "mark bad below bottom" set to YES by default.


regards

David Williams
Coastal and Marine Hydrology
Natural Systems Division
Department of Natural Resources, Environment and the Arts
Palmerston NT 0830
Australia

http://www.ipe.nt.gov.au/whatwedo/water-resources/index.html

phone: +61 8 8999 3694
e-mail: david.williams at nt.gov.au


_____________________________________________
From: acoustics-bounces at simon.er.usgs.gov@NTGEMAG On Behalf Of
acoustics-request at simon.er.usgs.gov
Sent: Thursday, 3 November 2005 03:30 AM
To: acoustics at simon.er.usgs.gov
Subject: Acoustics Digest, Vol 28, Issue 2


Send Acoustics mailing list submissions to
acoustics at simon.er.usgs.gov

To subscribe or unsubscribe via the World Wide Web, visit
http://simon.er.usgs.gov/mailman/listinfo/acoustics
or, via email, send a message with subject or body 'help' to
acoustics-request at simon.er.usgs.gov

You can reach the person managing the list at
acoustics-owner at simon.er.usgs.gov

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Acoustics digest..."

Today's Topics:

1. RE: Acoustics Digest, Vol 28, Issue 1 (Randy Marsden)

Content-Transfer-Encoding: quoted-printable
From: "Randy Marsden" <rmarsden at rdinstruments.com>
Precedence: list
MIME-Version: 1.0
To: <acoustics at simon.er.usgs.gov>
Date: Tue, 1 Nov 2005 10:14:29 -0800
Message-ID: <RDINT524lZONkfptrKU0000a7c0 at rdint5.RDI.ADCP>
Subject: [Acoustics] RE: Acoustics Digest, Vol 28, Issue 1
Message: 1
Content-Type: text/plain;	charset="US-ASCII"


Lindsay,

Before playing back StreamPro data in WinRiver, you must use the utility
program INI2XML.exe to convert the StreamPro xml files to WinRiver w.000
format. Then you can playback the data files with all of the correct
settings.

The procedure is described in the StreamPro QuickStart Guide in the
"Viewing Data with WinRiver" section and in Section 4.2 of the StreamPro
Software User's Guide.

Randy Marsden
Water Resources Applications Scientist
Teledyne RD Instruments

Ph: 858-693-1178
email: rmarsden at rdinstruments.com


----------------------------------------------------------------------

Message: 1
Date: Mon, 31 Oct 2005 14:38:15 -0900
From: Lindsay J Pickrell <pickrell at usgs.gov>
Subject: [Acoustics] StreamPro issue
To: acoustics at simon.er.usgs.gov

<OF28523DFF.22D1BD6F-ON892570AB.008119DC-892570AB.0081D8C3 at usgs.gov>
Content-Type: text/plain; charset="us-ascii"

A few of us at the Anchorage field office have been using the StreamPro
quite a bit lately and have found that it doesn't always copy all of the

data from the configuration file over into WinRiver.  I've seen the
profiler depth and edge estimates erased when .xml files are converted
to
WinRiver, giving you different section discharges.  If you re enter your

transducer depth and edge estimates into WinRiver it will compute the
same
discharge that was recorded in the field.  I have had several
successfull
conversions to WinRiver with no problems so I am not sure when this
occurs.  It may be a good idea to make sure your discharges match those
recorded in the field when using this program to convert StreamPro .xml
files to WinRiver.

Lindsay
-------------- next part --------------


_______________________________________________
Acoustics mailing list
Acoustics at simon.er.usgs.gov
http://simon.er.usgs.gov/mailman/listinfo/acoustics

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://simon.er.usgs.gov/pipermail/acoustics/attachments/20051103/bda4368d/attachment.html