[Acoustics] Campbell CR1000 DCP's

[Michael.Yemm at dpiwe.tas.gov.au]

Is anyone using Unidata 6004C loggers for these type of applications? I 
use the 6004C with Magpie software for all our streamgauging sites. I find 
them much easier than Campbells to use and writing programmes with Magpie 
is extremely simple. They're a very versatile logger that you don't need 
to be a rocket scientist to master!

Cheers,

Mick Yemm
Senior Water Information Officer.
Water Assessment & Planning.
Water Resources Division.
Department of Primary Industry, Water and Environment.
13 St Johns Ave. New Town. 7008
Tasmania. Australia.
E-mail  Michael.Yemm at dpiwe.tas.gov.au
Ph  : 03 6233 3043
Fax : 03 6233 6881
Mob: 0407 491 340

The information in this transmission may be confidential and/or protected 
by legal professional privilege, and is intended only for the person or 
persons to whom it is addressed. If you are not such a person, you are 
warned that any disclosure, copying or dissemination of the information is 
unauthorised. If you have received the transmission in error, please 
immediately contact this Office by telephone, fax or email, to inform us 
of the error and to enable arrangements to be made for the destruction of 
the transmission, or its return at our cost. No liability is accepted for 
any unauthorised use of the information contained in this transmission. If 
the transmission contains advice, the advice is based on instructions in 
relation to, and is provided to the addressee in connection with, the 
matter mentioned above. Responsibility is not accepted for reliance upon 
it by any other person or for any other purpose.

-- 
Tasmania Together 5 Year Review: Have your say: www.tasmaniatogether.tas.gov.au

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://simon.er.usgs.gov/pipermail/acoustics/attachments/20050930/9820b545/attachment.html