[Acoustics] diagnostics test results

[Victor A Levesque]

Hello John,

There is some discussion of the test results in the RDI manual "WorkHorse 
Commands and Output Data Format". Chapter 2.6 (pgs 48 - 61). It is 
available for download from their web site, and you should have a copy 
that came with your WorkHorse on one of the CDs. It's an Adobe Acrobat 
file.

It may not give you exact answers, but it does explain what the tests are 
doing, and gives some guidelines for what are acceptable results from the 
tests.

Hope this will help.

Victor

Victor Levesque

U.S. Geological Survey
Center for Coastal and Watershed Studies
Tampa, FL
813-975-8620 extension 167
FAX: 813-975-0839




"John B Storm" <jbstorm at usgs.gov>
Sent by: acoustics-bounces at simon.er.usgs.gov
10/22/2004 12:35 PM

 
        To:     acoustics at simon.er.usgs.gov
        cc: 
        Subject:        [Acoustics] diagnostics test results



Is there any documentation listing the RGTest pass/fail results with explanation of what implications they could have?  
We have an 600KHz that's randomly going from complete PASS results one day 
to  FAIL results in different areas of the list on another. 

******************************
John Storm
USGS-WRD Mississippi 
(601) 933-2951
jbstorm at usgs.gov
******************************_______________________________________________
Acoustics mailing list
Acoustics at simon.er.usgs.gov
http://simon.er.usgs.gov/mailman/listinfo/acoustics


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://simon.er.usgs.gov/pipermail/acoustics/attachments/20041025/167ccf0a/attachment.html